How to fit, lift and remove Steadi from a tumbler
Seat a compatible tumbler fully, check handle clearance and remove a snug Steadi without pulling on the straw or lid.
Start with a clean, dry Steadi and an empty or securely closed tumbler. Hold the container and the holder while fitting them together. Check the entire base is seated before putting the drink down; support both pieces until you know how your exact combination behaves.
1. Measure before pressing
The container base must be 2–3.15 inches across, inclusive. Measure straight through the center of the bottom, not around its circumference or across the widest rim. Remove an added boot before measuring. A low handle, flared lower body or unusual bottom can interfere even when a single measurement falls in range.
2. Seat it evenly
Hold Steadi and guide the lower part of the tumbler between the flexible fins. Use controlled pressure and check that the container sits fully and evenly. Do not force it past a handle or accessory. If it will not seat without force, stop and ask for fit help.
3. Set the complete base down
Choose a level, supported location with room for the full 5.2-inch footprint. Check underneath for objects, cords or folds that could leave the base tilted. Keep it away from the edge. Steadi rests on the surface; it is not suction-mounted, clamped or fixed to it.
4. Lift with care
The fins grip compatible containers so Steadi can stay with the drink, but grip varies with shape and seating. Support the holder on the first lift. Never carry the combination by Steadi alone, the straw or a removable lid. Check that the tumbler’s own lid is secure and follow its maker’s guidance.
5. Remove a snug fit gently
Empty the tumbler when practical. Hold the container securely with one hand and Steadi with the other, then gently work the holder free. Avoid a sudden pull that could spill the drink or make the holder spring away. Do not use a sharp tool, heat or excessive force to separate them.
If it feels loose or will not seat
Recheck the actual base diameter and the lower shape, remove accessories and inspect the fins for an obstruction or visible damage. Do not treat a brand or ounce label as proof. Send the exact model, base measurement and a clear photo to the team if uncertainty remains. The fit guide distinguishes diameter checks from confirmed exact-model fit.